Home > News

Method Of Locking The Nut

Sep. 12, 2019 | 09:30:37
Share

Find here details of High Strength Nut on our website.


Uses: lock the outer joint of the wire or other fittings.


High Strength Nut

High Strength Nut


The working principle of the nut is self-locking by the friction between the nut and the bolt. However, the reliability of this self-locking in dynamic loads is reduced. In some important cases, we will take some anti-loose measures to ensure the reliability of the nut locking. The use of a lock nut is one of the anti-loose measures.


There are also three types of lock nuts shared by professional Fastener Nut Supplier:

The first is to use two identical nuts to screw on the same bolt, and a tightening torque is added between the two nuts to make the bolt connection reliable.


The second type is a special locknut that needs to be used with a lockable gasket. The special locknut is not a hex nut, but a round nut with 3, 4, 6 or 8 notches on the circumference of the nut (depending on the size of the nut and the manufacturer's product range), this Several notches are the point of focus of the tightening tool and the snap-in of the lock tab.


The third type is a threaded hole (usually two, 90 in the outer circular surface) drilled through the outer surface of the nut to the inner circular thread surface, for screwing a small diameter countersunk head screw for the purpose of threading Apply a force in the centripetal direction to prevent the lock nut from loosening. A better quality lock nut sold on the market is provided with a small piece of copper on the inner circumference of the nut that is aligned with the thread of the lock nut to prevent the radial cap screw from directly contacting the locked thread and damaging the latter. . This kind of lock nut is gradually applied in the case of the shaft end locking of the rotary motion type parts, such as the anti-looseness of the ball screw mounting end bearing.


The second type of anti-loosening method is more reliable than the first one, but the structure is relatively complicated. Compared with the first two, the third clock has the characteristics of better anti-loose effect, simpler and more beautiful structure and smaller axial dimension.


If you need any information about Grade B Nuts, feel free to contact us.