Home > News

Do You Know Common Parts Of Fasteners?

Jul. 13, 2019 | 14:44:36

Fasteners include some common parts which are used mostly by us. Do you know what are the common parts of it? Fastener Nut Manufacturer would like to share it with you. I hope you can learn something from our article.

Fastener Nut Manufacturer

1. Bolt: A type of fastener consisting of a head and a screw (a cylinder with an external thread) that is to be fitted with a nut for fastening two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection. Our factory has various bolts, such as Segment Bolt. If you need any bolt, fell free to let us know.

2. Stud: A type of fastener that has no head and only has threads on both ends. When connecting, one end must be screwed into the part with the internally threaded hole, the other end is passed through the part with the through hole, and then the nut is screwed, even if the two parts are fastened together as a whole. This type of connection is called a stud connection and is also a detachable connection. It is mainly used in the case where one of the connected parts has a large thickness, requires a compact structure, or is frequently used for disassembly, and should not be bolted.

3. Screw: A type of fastener that is also composed of two parts, the head and the screw. It can be divided into three categories according to the purpose: machine screws, set screws and special purpose screws. The machine screw is mainly used for a tightly threaded part and a tight connection with a part with a through hole. No need for a nut fit (this type of connection is called a screw connection and is also a detachable connection; Fitted with a nut for a secure connection between two parts with through holes.) The set screw is primarily used to secure the relative position between the two parts. Special purpose screws such as eye bolts are used for lifting parts.